FFCars.com : Factory Five Racing Discussion Forum

Shoulder Harness

Airspeed1 — Fri, 24 May 2013 16:45:18 GMT

Hi Gang:

Does anyone have a good picture showing where you installed the inboard passenger shoulder harness. The other shoulder harness fit easily over the horizontal roll bar. The diagonal roll bar interfers with the natural place to put the inboard harness on the passenger side.

Thanks,
Jerry

LS3 engine size?

5873 — Fri, 24 May 2013 16:39:21 GMT

I want to use the LS3 crate for a project car, but cannot find good dimensions for it and space will be tight. Does anyone have an LS3 to measure the length, width, and height?
Thanks.

Just Finished GTM!!

hootrandc — Fri, 24 May 2013 16:33:38 GMT

Just got done fixing and painting this GTM for a customer in AZ. Did a lot of work on this car making lines right and doors and windows fit and not to mention changing a lot of stuff the original builder did. Should have more pictures soon and have more on our FB page. https://www.facebook.com/HootsRod. We changed the tilt hood to a linear actuator on rollers and it turned out pretty cool.

Attached Images

	Yellow 1.jpg (200.8 KB)
	Yellow 2.jpg (183.5 KB)
	Yellow 4.jpg (163.9 KB)
	Yellow 8.jpg (176.2 KB)

Want to Buy: Bellhousing

BIL1024 — Fri, 24 May 2013 15:57:53 GMT

Looking for 87-93 bellhousing for stock T-5, thanks

Excellent - Men and Women

DMW — Fri, 24 May 2013 15:23:26 GMT

Very funny and very true.

It's Not About The Nail - YouTube

A9L computer help

Jim Ergler — Fri, 24 May 2013 15:03:49 GMT

I have an A9L computer in my roadster that has a problem, and needs to be replaced with a refurbished one. I've gone to Advanced Auto and Napa, but they don't recognize the A9L designation. What information do I need to give then, so I will get a true A9L computer? I know that the A9L is used in 5-sp car, but is it year, make, and or model, specific? Thanks for a reply.

Ergie

GTM 370 comes to life

Edgeman — Fri, 24 May 2013 14:26:10 GMT

Part33 - YouTube

Yahoo!!!!
I have it running with only one small leak. I would like to thank Jay and Mike at ISIS for getting my power and master cells back to me in 3 days. Talk about customer service, again thank you ISIS.

Repair Shop in the Dallas area?

Nova — Fri, 24 May 2013 14:18:18 GMT

Hey all, I'm fairly new to the Dallas area and in need of a competent repair facility. My Mk3 has a 93' Cobra motor with an oil leak at the front of the intake. The top of the motor is all 93' Cobra EFI. Any facility that is capable of working on a stock 93' Cobra will do. I'm just not sure where to go. Of course I want it done right the first time.

Any recommendations?

electric car lease what am I missing

mn12 — Fri, 24 May 2013 14:03:12 GMT

Hey guys I know there must be something I'm missing. The feds offer $7500 tax credit for a zero emissions vehicle and Georgia offer 20% of the MSRP up to $5K. Ford is currently offering an $11,000 rebate on the focus EV which brings a 36 month lease to $284 a month. Unless I'm missing something the tax credits equal the lease payments for 3 years making it essentially free to own.

For Sale: Parts

Saltshaker — Fri, 24 May 2013 13:37:52 GMT

1) new pair of wings with hardware $45 plus ride from NJ.....pending
2) used set of hardware to mount wings ( need polishing) $20......pending
3) rear license plate mounting bracket blk powered coated $10
4) full roll of Eastwood 400 grit sandpaper (2.75 wide) $10.....pending
5) 1 set adjustable set tracks lightly used $20....pending
6) new roll of insulate foil tape...?
7) 1bottle Eastwood Fast Etch metal prep $10
8) Mallory Dist cap & rotor 100 miles on it....$25
9) pair of 3" peep mirrors chrome & stainless $20.....pending
10) #10 x1/2" an 120 deg fitting & 1/2 x#10 Port adapter by Fragolia....both $20
11) reverse adapter for speedometer...used 1500 miles...$25 pending

SEND PM IF INTERESTED
Jon

Breakfast 05-25-13

hydramada65 — Fri, 24 May 2013 13:05:07 GMT

Who: Anyone who cares to come and join us
What: Breakfast and telling lies
Where: Perkins on Germantown Road at Wolf River
When: 8:00 am
Why: Because we can

For Sale: Tanner Turnplates

vector1 — Fri, 24 May 2013 13:03:00 GMT

Bought new by me, work great, adjustable pointer to determine degree turn for caster adjustment. Makes front end adjustments effortless.

$400 shipping included to conus.

Attached Images

turnplates 001.jpg (246.6 KB)

donor accelerator cable ?

mg2 — Fri, 24 May 2013 11:57:44 GMT

Has anyone used the Mustang donor accelerator cable?

Headed for Louisville!

steno — Fri, 24 May 2013 11:38:42 GMT

I'll be in Louisville sat and sun for a music fest at the Galt hotel. Any car shows or activities in the area?
Thanks, Sten

Clutch

racingse — Fri, 24 May 2013 05:38:37 GMT

Im going to run csb and a T56 Magnum and bought the T56 with clutch fork kit to use with the FFR cable setup. But i just found out the hard way that the clutch fork on the T56 is the "push style" and the FFR setup is the "pull style".
So im a stupid sucker :iamwithstupid: and have to pay for it.

Question is how i move on. Is their any mechanical solution? or do i need to go hydralic?