FFCars.com : Factory Five Racing Discussion Forum - View Single Post - Source for weld-in steel fitting for 1/8 NPT oil temp sensor

forrest1 · 11-13-2002, 10:53 PM

Yep, Vortech uses a 3/8" NPT fitting, same as Paxton. That's why I have the tap, BTW.

Barry,
Vortech has their installation instructions available on their website, should you want to peruse them for hole location, etc. The instructions are very complete, far superior to the Paxton instructions.

Forrest

11-13-2002, 10:53 PM	#12 (permalink)
forrest1 Moderator Join Date: Jan 2002 Location: Sunny San Diego Posts: 3,886	Yep, Vortech uses a 3/8" NPT fitting, same as Paxton. That's why I have the tap, BTW. Barry, Vortech has their installation instructions available on their website, should you want to peruse them for hole location, etc. The instructions are very complete, far superior to the Paxton instructions. Forrest __________________ Former Owner/Builder FFR 2433