Has anyone gone thru the new registration classification process in Texas yet? How did it go?
__________________
If you collect enough parts, you're bound to end up with a car, right?
FFR 6203, Ordered 6/5/07 Stewart delivery 7/9/07, First Start 1/24/09, 2nd First Start 12/31/09, Go Karted 1/2/10, In the shop for bodywork and paint 6/25/11 Painted body installed 10/10/11
Pin Drive width, 3.27 IRS, Full Emission 302 EFI w/Trick Flow Top End Kit and ISIS, and lots of ideas stolen from here!
It went smooth, only took me about 15 minutes, but it will have to be classified as an assembled car for what ever year you complete it. The days of getting it titled as a 1965 are about over unless you find a tax office that isn't quite up on the regs. Even if you do it will probably be titled as the year you built it when Austin reviews the paperwork. I checked with them on mine to get it retitled as a 1965 and they were well aware of what it was and refused to change the year.
The OP is referring to the 2011 Texas Street Rod and Custom Vehicle Bill, according to which replicas will be titled in the year model that they resemble and will be exempt from emissions regulations.
Although the bill was supposed to be effective Sept 1 2011, the Texas DMV website says that implementation is delayed. I recently emailed them and was told that implementation should begin early in 2012. See below.
Quote:
Good morning,
Thank you for your e-mail. We are estimating the implementation of this bill to be around the beginning of 2012. Please check back with us around the end of January for more information.
Have a Happy Thanksgiving!
Sincerely,
Emily Scroggs
Texas Department of Motor Vehicles
Consumer Relations Division
We are always trying to improve and appreciate your feedback. Please visit our website at Talk to Us and take our customer satisfaction survey. If you have a suggestion, a complaint or even a compliment, e-mail us at DMVSuggestions@TxDMV.gov. You may contact me directly at (512) 465-7520, or email me at Emily.Scroggs@TxDMV.gov.
From: <rgsvv823@entouchonline.net>
To: <ASKVTR@dmv.state.tx.us>
Date: 11/21/2011 6:11 PM
Subject: TxDMV Internet E-Mail
Name: Ram Gopalkrishnan<rgsvv823@entouchonline.net>
Address:
9110 Stones Throw Lane
Missouri City, TX 77459
281 778-7923
Comment: Hello,
What is the schedule for implementation of HB-890 Texas Street Rod and Custom Vehicle Bill as passed by the 82nd Legislature? I have read the statements about the implementation being delayed until the inspection plan is created. This makes sense, of course, but what is missing is the schedule for creation of the inspection plan followed by full implementation of the bill. When will that get done - or what is the latest estimate of when it will get done?
Thanks, Ram.......let's keep everyone informed when any of us get any new info!
__________________
If you collect enough parts, you're bound to end up with a car, right?
FFR 6203, Ordered 6/5/07 Stewart delivery 7/9/07, First Start 1/24/09, 2nd First Start 12/31/09, Go Karted 1/2/10, In the shop for bodywork and paint 6/25/11 Painted body installed 10/10/11
Pin Drive width, 3.27 IRS, Full Emission 302 EFI w/Trick Flow Top End Kit and ISIS, and lots of ideas stolen from here!
Best of luck down there in TX. We got a SEMA bill passed in WA in April, effective Oct. 2011. It has been a battle to get implementation. Major roadblock was a DOL person that missed section allowing retitles. Cleared that up, but State Police inspectors are sceptical due to conflicting messages. After opposition from my local inspection station finally got an appointment with the Seattle inspectors this week. If I get thru I'll be the first retitle in WA. Hopefully TX bureaucrats aren't as bad as ours and you guys will have smooth sailing.
I sent an inquiry of my own to the email address that Ram used. I'll post the response.
Has anyone else gotten any information recently?
Thanks!
__________________
If you collect enough parts, you're bound to end up with a car, right?
FFR 6203, Ordered 6/5/07 Stewart delivery 7/9/07, First Start 1/24/09, 2nd First Start 12/31/09, Go Karted 1/2/10, In the shop for bodywork and paint 6/25/11 Painted body installed 10/10/11
Pin Drive width, 3.27 IRS, Full Emission 302 EFI w/Trick Flow Top End Kit and ISIS, and lots of ideas stolen from here!
This is the reply I got....I'll let you know if I get anything more on timing.
"Thank you for your inquiry. Implementation of this new bill is not in effect at this time. Our agency is working to implement this program.
I'll be happy to see if we have a more definite date of implementation and get back to you shortly.
Thank you,"
__________________
If you collect enough parts, you're bound to end up with a car, right?
FFR 6203, Ordered 6/5/07 Stewart delivery 7/9/07, First Start 1/24/09, 2nd First Start 12/31/09, Go Karted 1/2/10, In the shop for bodywork and paint 6/25/11 Painted body installed 10/10/11
Pin Drive width, 3.27 IRS, Full Emission 302 EFI w/Trick Flow Top End Kit and ISIS, and lots of ideas stolen from here!
I just titled mine last month at the beginning of Dec.
The folks at the inspection station did not know of HB890 passing, but I brought a copy with me and showed it to him, so they signed it off as a '65. Same thing at the tax office.
Just got my title last week...sweet!
__________________
FFR6653 - 3.1 complete delivered 6/10/08, first start 2/18/2009, go-kart 3/31/09, titled 12/7/2011, 331 DSS short block, Holley Street HP650 DP/Vic Jr intake, Edel RPM 2.02 heads, XE282HR, 3.55, TKO600 .64OD midshift, 3 link, badass black, fat 15's on Team3's
"I checked on the status of this bill and we still do not have a final implementation date at this time. I can tell you we're working on the forms and policies/procedures required to implement this program. We hope to have these Administrative Rules approved by the end of February. If this proposed timeline is met, implementation may not be far behind.
If you'd like, feel free to check back with me around end of March/beginning of April. If I here anything before then, I'll let you know.
Thank you,
Lindsy Frank Lindsy.Frank@TxDMV.gov
Consumer Relations Division
Texas Department of Motor Vehicles"
__________________
If you collect enough parts, you're bound to end up with a car, right?
FFR 6203, Ordered 6/5/07 Stewart delivery 7/9/07, First Start 1/24/09, 2nd First Start 12/31/09, Go Karted 1/2/10, In the shop for bodywork and paint 6/25/11 Painted body installed 10/10/11
Pin Drive width, 3.27 IRS, Full Emission 302 EFI w/Trick Flow Top End Kit and ISIS, and lots of ideas stolen from here!
"Unfortunately we don't have an exact date. All we know at this time is we're plan to have the rules for this program finalized in March.
If/when they are, the counties will be notified to start processing these. I'd say it may be around April or so before we can start this, but that's just an estimate.
I'll keep you posted when the final notification is sent out."
__________________
If you collect enough parts, you're bound to end up with a car, right?
FFR 6203, Ordered 6/5/07 Stewart delivery 7/9/07, First Start 1/24/09, 2nd First Start 12/31/09, Go Karted 1/2/10, In the shop for bodywork and paint 6/25/11 Painted body installed 10/10/11
Pin Drive width, 3.27 IRS, Full Emission 302 EFI w/Trick Flow Top End Kit and ISIS, and lots of ideas stolen from here!
Welcome to FFCars! The
representations expressed are the representations and opinions of
the FFCars.com forum members and do not necessarily reflect the
opinions and viewpoints of the site owners, moderators, Factory Five
Racing, Inc. or Ford Motor Company. This website
has been planned and developed by FFCars.com and its forum members
and should not be construed as being endorsed by Factory Five
Racing, Inc. or Ford Motor Company for any
purpose. "FFR", "Factory Five", "Factory Five Racing", and the
Factory Five Racing logo are registered trademarks of Factory Five
Racing, Inc. FFCars.com forum members agree not to
post any copyrighted material unless the copyrighted material is
owned by you. Although we do not and cannot review the messages
posted and are not responsible for the content of any of these
messages, we reserve the right to delete any message for any reason
whatsoever. You remain solely responsible for the content of your
messages, and you agree to indemnify and hold us harmless with
respect to any claim based upon transmission of your message(s).
Thank you for visiting the FFCars.com Forum dedicated to Factory
Five.