9/5 or 9/6? Options Hilltop, Woodman's, Clam Box, Fuddrakers (they have a car show on Thursdays) Liberty Tree Mall in Danvers has weekly car shows on Wednesdays and a Kelly's next door, or any place else anybody wants to go to. Hooters in Saugus?
Always a good reason to get together!
Bill
__________________
front and rear FFR control arms,FMS 345hp,cobra intake,tan leather int., FR rack, Powder coated Suspension, stainless nudge bars, five lug halibrands, stainless steel side pipes, chrome roll bar, heater, wiper, wind wings, Breeze streering shaft, Breeze offset bushings,...done in 10/02??? I HOPE!!!! Legal as of 10/17/02
With you Bill, anytime.
I could make any location, but it would have to be in my daily driver. Work calls at 9:00 p.m.
Ray
__________________
FFR 4246 Stock build/ Dual roll bars/ Street performer seats/ 3-link suspension package, Koni coilovers/ Goodyear Eagle GT's on PSE wheels/Color-GM Magnetic Red/306 Ford Racing crate engine
I'm in if we do Wednesday. Busy on Thursday. Liberty Tree Mall followed by Clam Box, Kelly's, etc. sound good. We can toast to Rob's official July 31 retirement!
__________________
I did what I could...#2734, 302, tremec, 3:55, millenium silver, no stripes.
We would love some new faces. Always welcome to any gathering we have.
Sounds like Wednesday, Liberty Tree Mall in Danvers MA. Cars start pulling in around 2 or 3 pm. If you have never been there they save a lot in the back just for show cars, (Ray...clean your truck). Then we can have some roast beef at Kelly's or lobsta' rolls!
Bill and Helena and maybe Kodiak!
__________________
front and rear FFR control arms,FMS 345hp,cobra intake,tan leather int., FR rack, Powder coated Suspension, stainless nudge bars, five lug halibrands, stainless steel side pipes, chrome roll bar, heater, wiper, wind wings, Breeze streering shaft, Breeze offset bushings,...done in 10/02??? I HOPE!!!! Legal as of 10/17/02
I'm in if we do Wednesday. Busy on Thursday. Liberty Tree Mall followed by Clam Box, Kelly's, etc. sound good. We can toast to Rob's official July 31 retirement!
Shirlly you jest...Rob can't be that old!
__________________
front and rear FFR control arms,FMS 345hp,cobra intake,tan leather int., FR rack, Powder coated Suspension, stainless nudge bars, five lug halibrands, stainless steel side pipes, chrome roll bar, heater, wiper, wind wings, Breeze streering shaft, Breeze offset bushings,...done in 10/02??? I HOPE!!!! Legal as of 10/17/02
[QUOTE=RE63;2707532]Depending on the weather, and my work load I would like to attend,
You have a job?
__________________
front and rear FFR control arms,FMS 345hp,cobra intake,tan leather int., FR rack, Powder coated Suspension, stainless nudge bars, five lug halibrands, stainless steel side pipes, chrome roll bar, heater, wiper, wind wings, Breeze streering shaft, Breeze offset bushings,...done in 10/02??? I HOPE!!!! Legal as of 10/17/02
I guess the cat is out of the bag. Rob is retired, btw what day is it
Forgot everything I use to do for a living. I now can cash in on all those senior discounts.
I'll be in town on Wednesday so I'm in.
__________________
Rob Baker
FFR-4661 Kit picked up Sept 27, 2003, three-link, coilovers, \'92 donor build, first start/go-cart 12/13/2004, street legal 6/15/2005.
I guess the cat is out of the bag. Rob is retired, btw what day is it
Forgot everything I use to do for a living. I now can cash in on all those senior discounts.
I'll be in town on Wednesday so I'm in.
Good for you, Rob!
__________________
John
Good judgement comes from experience, and a lot of that comes from bad judgement.
I guess the cat is out of the bag. Rob is retired, btw what day is it
Forgot everything I use to do for a living. I now can cash in on all those senior discounts.
I'll be in town on Wednesday so I'm in.
So ...dinner for Rob is 3:30 pm till 4:30 pm?
__________________
front and rear FFR control arms,FMS 345hp,cobra intake,tan leather int., FR rack, Powder coated Suspension, stainless nudge bars, five lug halibrands, stainless steel side pipes, chrome roll bar, heater, wiper, wind wings, Breeze streering shaft, Breeze offset bushings,...done in 10/02??? I HOPE!!!! Legal as of 10/17/02
When you retire you have something called a fixed income. That means the money is tight. This causes old people to "stretch" their money. The "early bird" dinners are greatly dis-counted between say 3 to 5 pm. Mon thru Thursday. You will be tested on this.
Bill
PS congrats to Rob. All you have to do now is get your better half to retire. Good luck with that!
__________________
front and rear FFR control arms,FMS 345hp,cobra intake,tan leather int., FR rack, Powder coated Suspension, stainless nudge bars, five lug halibrands, stainless steel side pipes, chrome roll bar, heater, wiper, wind wings, Breeze streering shaft, Breeze offset bushings,...done in 10/02??? I HOPE!!!! Legal as of 10/17/02
When you retire you have something called a fixed income. That means the money is tight. This causes old people to "stretch" their money. The "early bird" dinners are greatly dis-counted between say 3 to 5 pm. Mon thru Thursday. You will be tested on this.
Bill
PS congrats to Rob. All you have to do now is get your better half to retire. Good luck with that!
And all this time I thought a fixed income meant you were no longer broke.
__________________
MKIII 5446 Picked up May 06 - Completed May 07.
5.0 EFI-T5- BBK shorties, Edelbrock performer, underdrive pulleys. PS-PB
MK3.1 6707 Picked up July 9,2008 completed May 2009-sold 10/22/09
MKIV ordered 3/5/2010 delivery 4/16/2010 First start 4/29/10 complete 8/23/2010 sold 11/23/2010
"Some people stand around talking about why it can't be done, while others are doing it"
New location...Hamilton, Bermuda next Wednesday same time. See everyone there!
(Yes, we are going down to see the hurricane!!!)
B and H
__________________
front and rear FFR control arms,FMS 345hp,cobra intake,tan leather int., FR rack, Powder coated Suspension, stainless nudge bars, five lug halibrands, stainless steel side pipes, chrome roll bar, heater, wiper, wind wings, Breeze streering shaft, Breeze offset bushings,...done in 10/02??? I HOPE!!!! Legal as of 10/17/02
Welcome to FFCars! The
representations expressed are the representations and opinions of
the FFCars.com forum members and do not necessarily reflect the
opinions and viewpoints of the site owners, moderators, Factory Five
Racing, Inc. or Ford Motor Company. This website
has been planned and developed by FFCars.com and its forum members
and should not be construed as being endorsed by Factory Five
Racing, Inc. or Ford Motor Company for any
purpose. "FFR", "Factory Five", "Factory Five Racing", and the
Factory Five Racing logo are registered trademarks of Factory Five
Racing, Inc. FFCars.com forum members agree not to
post any copyrighted material unless the copyrighted material is
owned by you. Although we do not and cannot review the messages
posted and are not responsible for the content of any of these
messages, we reserve the right to delete any message for any reason
whatsoever. You remain solely responsible for the content of your
messages, and you agree to indemnify and hold us harmless with
respect to any claim based upon transmission of your message(s).
Thank you for visiting the FFCars.com Forum dedicated to Factory
Five.
Linear Mode
