Just curious, at what pressure does the stock 302 oil pressure relief valve open and relieve?
__________________
If you collect enough parts, you're bound to end up with a car, right?
FFR 6203, Ordered 6/5/07 Stewart delivery 7/9/07, First Start 1/24/09, 2nd First Start 12/31/09, Go Karted 1/2/10, In the shop for bodywork and paint 6/25/11 Painted body installed 10/10/11
Pin Drive width, 3.27 IRS, Full Emission 302 EFI w/Trick Flow Top End Kit and ISIS, and lots of ideas stolen from here!
Melling stock pump (standard volume/standard pressure) should bypass around 50 psi. Your actual indicated pressure will depend on your bearing clearances(prior to 50 psi).
So when my gauge is indicating above 60, the relief valve is open? I do see pressures indicated above 60 at startup.
__________________
If you collect enough parts, you're bound to end up with a car, right?
FFR 6203, Ordered 6/5/07 Stewart delivery 7/9/07, First Start 1/24/09, 2nd First Start 12/31/09, Go Karted 1/2/10, In the shop for bodywork and paint 6/25/11 Painted body installed 10/10/11
Pin Drive width, 3.27 IRS, Full Emission 302 EFI w/Trick Flow Top End Kit and ISIS, and lots of ideas stolen from here!
Welcome to FFCars! The
representations expressed are the representations and opinions of
the FFCars.com forum members and do not necessarily reflect the
opinions and viewpoints of the site owners, moderators, Factory Five
Racing, Inc. or Ford Motor Company. This website
has been planned and developed by FFCars.com and its forum members
and should not be construed as being endorsed by Factory Five
Racing, Inc. or Ford Motor Company for any
purpose. "FFR", "Factory Five", "Factory Five Racing", and the
Factory Five Racing logo are registered trademarks of Factory Five
Racing, Inc. FFCars.com forum members agree not to
post any copyrighted material unless the copyrighted material is
owned by you. Although we do not and cannot review the messages
posted and are not responsible for the content of any of these
messages, we reserve the right to delete any message for any reason
whatsoever. You remain solely responsible for the content of your
messages, and you agree to indemnify and hold us harmless with
respect to any claim based upon transmission of your message(s).
Thank you for visiting the FFCars.com Forum dedicated to Factory
Five.
Linear Mode
